24
E
Mastering
the Basics
Playing Back a Cassette
You can use the LCD screen for instant, on-the-spot playback. The camera also
plays back the sound track via the built-in speaker ( 27).
• When you play back a tape, you can also close the LCD panel with its screen
side facing up. Operate the camera with the wireless controller when the LCD
panel is in this position.
• When you’re using the viewfinder to view playback, close the LCD panel.
To play back your recordings on a TV, see p. 28.
To use the wireless controller, see p. 42.
• To avoid accidental recording, make sure that you slide the tab on the cassette
so that it exposes the hole (the switch position is usually labeled SAVE or
ERASE OFF).
1. Attach a power source and turn the POWER dial to VCR.
• The power indicator lights up green.
2. Load the cassette.
3. Press the
ee
(play) button to start playback.
• To end playback, press the 3 (stop) button.
• To wind the tape forwards, stop playback and press the 1 (fast forward)
button.
• To wind the tape backwards, stop playback and press the ` (rewind)
button.
• If the playback picture is rough (mosaic-like noise), clean the video heads
using a Canon DVM-CL Digital Video Head Cleaning Cassette or a
commercially available digital video head cleaning cassette.
To Next Page
Loading...
Need help?
General
