With most camcorders, even the slightest hand movements will be noticeable
during telephoto recording. However, the ELURA2/ELURA2 MC’s image
stabilizer allows you to obtain steady recordings even at high magnification.
To turn the image stabilizer off, open the menu and select CAM.SET UP.
Then select IMAGE S., set it to OFF and close the menu.
• The i mark disappears from the display when the stabilizer is off.
• The image stabilizer cannot be turned off when the program selector is set
to the [ (Easy Recording) position.
• The image stabilizer is designed to deal with a normal degree of camera shake.
• Keep the image stabilizer turned off when the camera is mounted on a tripod.
• The image stabilizer is not as effective as usual during the Low Light mode.
To Next Page
Loading...
Need help?
General
