97
Exposure Control
5
Auto Exposure Bracketing
•
C.Fn-06-2 enables the AEB amount to be set in 1/2-stop increments with the
shutter speed or aperture. (→p.134)
Also, C.Fn-05-1 enables a manual exposure to be set with a fixed shutter speed
and varying aperture. (→p.134)
•
C.Fn-09-2/3 changes the bracketing sequence to decreased exposure, standard
exposure, and increased exposure. (→p.135)
•
C.Fn-01-1 enables the viewfinder information to be displayed during continuous
shooting of the bracketed shots. (→p.133)
Canceling AEB
Canceling shutter speed AEB or aper-
ture AEB
•
While pressing the < > and < > buttons, turn
the <
> dial to set the AEB amount to “ ”. Then
let go of the <
> and < > buttons. This will
cancel AEB.
Canceling ISO speed AEB
•
While pressing the < > and < > buttons, turn
the <
> dial to set the AEB amount to “ ”. Then
let go of the <
> and < > buttons. This will
cancel AEB.
•
After canceling ISO speed AEB, set the ISO speed
as necessary. (→p.49)
C.Fn C.Fn-9-1/3 prevents AEB from being canceled when you change lenses,
replace the CF card, replace the battery, set a bulb exposure, have the flash ready
to fire, press the <
> button, or set the < > switch to < >. (→p.135)
AEB will also be canceled if you change lenses, replace the CF card, replace the
battery, set a bulb exposure, have a flash-ready Speedlite, press the <
> button,
or set the <
> switch to < >.
To Next Page
