Canon EOS 5 - Page 34

1) Turn the command dial to a creative zone
position.
2) Press the AF focusing point selection but
ton.
• The currently selected AF frame lights
red in the viewfinder and the AF focus
ing point indicator blinks in the LCD
panel.
3) Turn the main dial to select all five AF fo
cusing points.
• All AF frames light red in the viewfinder
and all AF focusing point indicators
blink in the LCD panel.
4) Set the command dial to the “ QD ” posi
tion.
• “CAL” or “OFF” appears in the LCD
panel.
5) Turn the main dial to the appropriate cali
bration number.
• Numbers which have been calibrated
light steadily in the display. Numbers
which do not yet contain calibration set
tings blink in the display.
21