6) Turn the command dial to the desired
shooting mode.
• “ i> ’’appearsintheviewfinderand“ ”
appears in the LCD panel.
7) Look through the viewfinder and press the
shutter button halfway while looking at the
desired AF frame.
• The selected AF frame lights red in the
viewfinder and focusing is carried out
for that focusing point.
8) To cancel Eye Controlled Focus mode, set
the calibration display to “OFF" in step 5.
• The camera enters automatic focusing
point selection mode.
When the camera is held vertically in Eye
Controlled Focus mode, the focus mode tem
porarily switches to automatic focusing point
selection mode and “ E> ” disappears from
the viewfinder.
To Next Page
