152
The file name has four alphanumeric
characters followed by a four-digit image
number (p.154) and extension. The first four
alphanumeric characters are set upon factory
shipment and unique to the camera. However,
you can change them.
With “User setting1”, you can change and register the four characters
as desired. With “User setting2”, if you register three characters, the
fourth character from the left will be appended automatically to indicate
the image size.
1
Select [File name].
Under the [51] tab, select [File
name], then press <0>.
2
Select [Change User setting].
Turn the <5> dial to select [Change
User setting*], then press <0>.
3
Enter any alphanumeric
characters.
For User setting1, enter four characters.
For User setting2, enter three characters.
Press the <L> button to delete any
unnecessary characters.
Press the <Q> button, and the text
palette will be highlighted in a color
frame. Text can be entered.
Operate the <5/6> dial or <9>
to move the and select the desired
character. Then press <0> to enter
it.
3 Changing the File Name
Registering or Changing the File Name
(Ex.) BE3B0001.JPG
To Next Page
Loading...
