230
If you press the <o>, <n>, <m>, <S>, or <b>
button while the image is displayed on the LCD monitor, the setting
screen will appear on the LCD monitor and you can turn the <6> or
<5> dial to set the respective function.
When f is set, you can press the <S> button to select the AF area
selection mode and AF point. The procedure is the same as with
viewfinder shooting. During manual-exposure shooting (p.223), you can
press the <m> button to set the ISO speed.
Note that the following cannot be set: <q> Metering mode, <y>
Flash exposure compensation, <w> HDR mode, and <P> Multiple
exposures.
While the image is displayed on the LCD monitor, you can press the
<Q> button and set the following: Auto Lighting Optimizer, card
selection, recording function, image-recording quality (still photos),
movie-recording size, and sound-recording level (with [Sound
recording: Manual] set).
1 Press the <Q> button.
X The settable functions will be displayed.
2 Select a function and set it.
Use <9> to select a function.
X The setting of the selected function is displayed at the bottom.
Turn the <5> or <6> dial to set it.
To set the card selection or recording function, press <0>, then
turn the <5> or <6> dial to set it.
Shooting Function Settings
f / R / B / i / S / A Settings
Q Quick Control
During movie shooting, you can set the following: Shutter speed, aperture,
ISO speed, exposure compensation, and sound-recording level. (Settable
functions may differ depending on the shooting mode and [Sound
recording] setting.)
To Next Page
Loading...
