Name: Canon EOS REBEL T7I
Brand: Canon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

211

With the built-in flash or an EX-series, external Speedlite compatible

with the flash function settings, you can use the camera’s menu screen

to set flash functions and the external Speedlite’s Custom Functions.

If you use an external Speedlite, attach the Speedlite to the camera

and turn on the Speedlite before setting the flash functions. For

details on the external Speedlite’s flash functions, refer to the

Speedlite’s instruction manual.

Select [Flash control].

 Under the [z2] tab, select [Flash

control], then press <0>.

 The Flash control screen will appear.

Select the desired item.

 Select the menu option to be set, then

press <0>.

To enable flash photography, set

[Enable]. To enable only the AF-assist

beam to be emitted, set [Disable].

For normal flash exposures, set it to

[Evaluative]. If [Average] is set, the

flash exposure will be averaged for the

entire metered scene. Depending on the

scene, flash exposure compensation

may be necessary. This setting is for

advanced users.

3 Setting the Flash FunctionN

Flash Firing

E-TTL II Flash Metering

Even if [Flash firing] is set to [Disable], if focus is difficult to achieve in low

light, the flash may still fire a series of flashes (AF-assist beam, p.121).

Other manuals for Canon EOS REBEL T7I

Questions and Answers:

Need help?

Do you have a question about the Canon EOS REBEL T7I and is the answer not in the manual?

General