Canon EOS REBEL T7I User Manual

78
<A> is a fully automatic mode. The camera analyzes the scene
and sets the optimum settings automatically. It can also adjust focus
automatically on either the still or moving subject by detecting the
motion of the subject (p.81).
1
Set the Mode Dial to <A>.
2
Aim the Area AF frame over the
subject.
 All the AF points will be used to focus,
and the camera will focus on the
closest object.
 Aiming the center of the Area AF
frame over the subject will make
focusing easier.
3
Focus on the subject.
 Press the shutter button halfway. The
lens elements will shift to focus.
 When achieving focus, the AF point
that has achieved focus will be
displayed. At the same time, the
beeper will sound and the focus
indicator <o> in the viewfinder will
light up.
 In low light, the AF point(s) will light
up briefly in red.
 If necessary, the built-in flash will be
raised automatically.
A Fully Automatic Shooting (Scene Intelligent Auto)
Area AF frame
Focus indicator
If a description of the shooting mode appears in step 1, press <0> to hide
it (p.56).

Canon EOS REBEL T7I Specifications

General

Sensor	24.2MP APS-C CMOS
Image Processor	DIGIC 7
ISO Range	100-25600 (Expandable to 51200)
Autofocus Points	45-point all cross-type
Video Recording	Full HD 1080p at 60 fps
Connectivity	Wi-Fi, NFC, Bluetooth
Dimensions	131.0 x 99.9 x 76.2 mm
Camera Type	DSLR
Continuous Shooting	Up to 6 fps
Battery	LP-E17
Viewfinder	Optical Pentamirror
LCD Screen	3.0-inch Vari-angle Touchscreen
Battery Life	Approx. 600 shots
Weight	532g (body only)