Canon FTb - Checking Film Loading and Speed Setting

Ghecking
Correct
Film Loading
The
film
is
properly
loaded
and advanced if the f
ilm
rewind
crank rotates
counterclockwise when
you
wind the
film
ad-
vance
lever. lf
the
film
rewind
crank
does not rotate, take
out the
f
ilm, as explained on the
following
page,
and reload.
Setting the Film
Speed
When loading the
f
ilm,
be sure
to set the
film
speed scale
at the
proper position.
Refer
to
page
19
for
setting the
film
speed.
Repacking
a
Long-Wound Film
When
repacking a
long-wound f
ilm
for
darkroom
loading
into
an
ordinary
cartridge,
be sure to trim
the
tip of the leader
between
perforations,
and make a
curl
in the
winding-up
direction.
trtronooDtrtroDotr
DOOtrO
www.orphancameras.com