Canon G3 - How to Use this Manual

Introduction
IV
HOW TO USE THIS MANUAL
Guide to Error Code Tables
1. Error code: If the model uses a 4-digit code (e.g., 0001 through 0999), ignore the first '0'.
(For example, '##0751' must be read '##751'.)
2. [TX]: An error occurring at time of transmission.
[RX]: An error occurring at time of reception.
[TX/RX]: An error occurring at time of transmission or reception.
3. Gives a description of the error code.
4. [xx model]: indicates an error code unique to the model in question.
5. Provides a description of the possible cause of the error code in question.
6. Shows action to take to correct the error.
• For Cause A, Remedies may be A-1 and A-2.
• For Causes B and C, the common Remedy B-1 may be used.
• If multiple remedies are provided as in the case of Cause A, go through them in the given
order (i.e., if A-1 fails to correct the fault, perform A-2).
7. If a description is underlined and marked with an asterisk with a number, you will find
explanations on the next page.
##000 [TX/RX] Communication cannot be made [xx model]
1
56
23 4
7
A-1
A-2
B-1
A
Cause Remedy
B
Malfunctioned because of an echo. Provide echo remedy 1
Using a manual call, press the Start
button after hearing the 1st DIS from
the other party.
Transmit once again.
The other party disconnected the line
while in reception.
C
The procedure signal has a fault.
*
7