Chapter 2: Service Error Codes
2-1
Cause Remedy
##001 [ TX ] In telephone fax mode transmission, the
phase OK signal cannot be received
• Increase the transmission level
*1
so that the
other party may receive the phase signal
correctly.
•
Adjust the NL equalizer
*2
so that the other
party may receive the phase signal cor-
rectly.
• The line condition is poor, and the other
party cannot receive the phase signal cor-
rectly.
Cause Remedy
##002 [ RX ] In G2 reception, the image storage
memory goes out of order
• Replace the system control board.• The buffer memory is faulty.
To Next Page
