To Next PageTo Next PageWhat to do if my Canon Camcorder shows abnormal characters on the screen?
If your Canon Camcorder displays abnormal characters or doesn't operate properly, disconnect the power source and reconnect it after a short time. If the problem persists, disconnect the power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings.
How to fix Canon HV20 wireless controller that will not work?
If the wireless controller for your Canon Camcorder is not working, set [WL.REMOTE] to [ON]. Also, replace the battery of the wireless controller if it is exhausted.
What to do if Canon Camcorder buttons will not work?
If the buttons on your Canon Camcorder are not working, first, ensure that the camcorder is turned on. Also, make sure a cassette is loaded.
What to do if Canon HV20 tape stops during record pause or playback pause?
To protect the tape and video heads, your Canon Camcorder will enter the stop mode if left in playback pause or record pause mode for 4 minutes 30 seconds. To resume playback, press START/STOP when recording or the playback button during playback.
How to fix Canon Camcorder if there is no sound from the built-in speaker?
If there is no sound from the built-in speaker of your Canon Camcorder, open the LCD panel. If the speaker volume is turned off, adjust the volume with the joystick and joystick guide in the specified mode.
What to do if Canon Camcorder is connected using the HDMI cable, but there is no picture or sound from the HDTV?
If your Canon Camcorder is connected using the HDMI cable, but there is no picture or sound from the HDTV, note that video input from the HDV/DV terminal cannot be output through the HDMI OUT terminal. This may also happen when playing back a tape that contains mixed recordings in different standards (HDV/DV). Disconnect the HDMI cable and then restore the connection or turn the camcorder off and then on again.
How to fix Canon HV20 if it will not focus?
If your Canon Camcorder will not focus, try focusing manually if autofocus does not work on that subject. If you are using the viewfinder, adjust it with the dioptric adjustment lever. Clean the lens with a soft lens-cleaning cloth if the lens is dirty, but never use tissue paper. If you are using the optional Wide-converter or Tele-converter, set [AF MODE] to [NORMAL AF].
What to do if my Canon Camcorder battery pack will not charge?
If the battery pack of your Canon Camcorder will not charge, ensure that you are charging it in temperatures between 0°C and 40°C. Battery packs may become hot with use and not charge. Also, if the battery pack is damaged, use a different one. When the battery pack is outside the charging temperature range, the CHARGE indicator will flash irregularly. Charging will start once the battery pack temperature is below 40 °C.
How to fix Canon HV20 that will not turn on?
If your Canon Camcorder won't turn on, the battery pack may be exhausted. Try replacing or charging the battery pack. Also, make sure the battery pack is correctly attached.
How to fix Canon HV20 that won't focus?
If your Canon Camcorder is not focusing, try these steps: If autofocus doesn't work on the subject, focus manually. If you are using the viewfinder, adjust it with the dioptric adjustment lever. Clean the lens with a soft lens-cleaning cloth, avoiding tissue paper. If you are using an optional Wide-converter or Tele-converter, set [AF MODE] to [NORMAL AF].
General| 3D | - |
|---|---|
| Camcorder type | Handheld camcorder |
| Self-timer delay | 2, 10 s |
| Minimum illumination | 0.2 lx |
| Camera shutter speed | 1/2000 s |
| Battery type | BP-2L13 |
| Battery capacity | - mAh |
| Battery life (max) | - h |
| Product color | Silver |
| Memory slots | 1 |
| Camcorder tape type | HDV |
| Camcorder media type | Memory card |
| Disc types supported | No |
| Compatible memory cards | MiniSD |
| Internal storage capacity | - GB |
| DV port | Yes |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 0 |
| Viewfinder type | Electronic |
| Viewfinder resolution | 123000 pixels |
| Viewfinder screen size | 0.27 \ |
| Display diagonal | 2.7 \ |
| Display resolution | 211000 pixels |
| Sensor type | CMOS |
| Total megapixels | 2.96 MP |
| Optical sensor size | 1/2.7 \ |
| Focus adjustment | Auto/Manual |
| Maximum video resolution | 1920 x 1080 pixels |
| Maximum image resolution | 2048 x 1536 pixels |
| Still image resolution(s) | 1920 x 1080, 2048 x 1536, 1440 x 1080, 848 x 480, 640 x 480 |
| PCM digital audio | 12-bit/32 kHz, 16-bit/48 kHz |
Weight and Dimensions| Depth | 138 mm |
|---|---|
| Width | 88 mm |
| Height | 80 mm |
| Weight | 535 g |
