Need help?Do you have a question about the Canon IMAGE FORMULA DR-3010C and is the answer not in the manual?
General| Scanner Type | Sheetfed |
|---|---|
| Light Source | LED |
| Optical Resolution | 600 dpi |
| Feeder Capacity | 50 sheets |
| Interface | USB 2.0 |
| Color Depth | 24-bit |
| Operating System Compatibility | Windows |
| Scanning Element | CIS |
| Scanning Speed | 30 ppm / 60 ipm |
| Max Document Size | 8.5" x 14" |
| Min Document Size | 2.1" x 2.8" |
| Output Resolution | 50 - 600 dpi |
| Dimensions (W x D x H) | 11.7" x 6.3" x 6.3" |
Explains symbols used for procedures, restrictions, and safety.
Indicates operations that may lead to death or injury if not performed correctly.
Indicates operations that may lead to injury or damage if not performed correctly.
Indicates operational requirements and restrictions for correct operation.
Clarifies operations or provides additional explanations for procedures.
Details safety warnings and precautions for scanner operation.
Provides environmental requirements for installing the scanner.
Instructions for connecting and using the AC adapter safely.
Precautions and procedure for safely moving the scanner.
Precautions for handling the scanner to prevent fire or electric shock.
Instructions for disposing of the scanner according to local laws.
Details the scanner's dimensions.
Highlights the scanner's high-speed document feeding capability.
Mentions the high optical resolution for scanning.
Describes the function of the eject tray for document stacking.
Explains the scanner's power link feature with the computer.
States support for Hi-Speed USB 2.0.
Notes support for color and grayscale scanning modes.
Lists supported scanning modes like single/double-sided.
Automatic detection of document size to eliminate unnecessary space.
Identifies and explains parts visible from the front and right side.
Details the buttons and display on the scanner's control panel.
Shows parts when the document trays are open.
Identifies and explains parts visible from the back.
Explains how to use the lever to change document feeding methods.
Describes the function of the paper eject stopper.
Lists the minimum system requirements for the scanner.
Outlines the process of installing the necessary software.
Describes the software included on the setup disc.
Details the steps for installing the scanner software.
Explains the scanner driver and job registration tool.
Describes CapturePerfect 3.0 as an ISIS compatible application.
Lists crucial points before installing software.
Guides through the typical software installation process.
Explains custom software installation options.
Details the setup process for CapturePerfect 3.0.
Covers the installation of the user manual.
Step-by-step guide to connect the scanner to the computer.
Crucial safety instruction before connecting the scanner.
Important safety and operational points when turning the power on.
Describes how the scanner is recognized by the computer.
Explains the 'AUTO' power switch setting linked to the computer.
Details the types and sizes of documents that can be scanned.
Specifies paper sizes and weights for plain paper.
Lists paper weight requirements for different modes.
Important criteria and recommendations for scannable documents.
Specifications for scanning business cards.
Specifications for scanning plastic cards.
Notes on scanning plastic and embossed cards.
Instructions for setting the extension trays according to document size.
Guidance on using the document stopper for specific document lengths.
Notes on using the document eject tray and extension tray.
Step-by-step guide for placing documents in Page Separation mode.
Caution about cutting hands on paper edges when loading.
Important note on document load limits to prevent jams.
Important tips for smooth feeding and closing trays.
Note on checking document condition before scanning.
Caution about foreign objects and loose clothing.
Instructions for placing documents in Bypass mode.
Important notes for placing fastened documents and closing trays.
Instructions for placing plastic cards for scanning.
Important note for scanning cards one at a time.
Explains how to scan folded documents using Folio Scan.
Caution about card placement and potential damage.
Important notes on folding documents and the fold line.
Guide to scanning using CapturePerfect 3.0 software.
Notes on scanning folded documents and driver settings.
Steps to select the scanner in CapturePerfect 3.0.
Notes on scanner recognition and default settings.
How to set scanner parameters within CapturePerfect 3.0.
Guide to using the Job function for automated scanning.
Explanation of the job function for registering and executing scanning jobs.
Note on the Job Registration Tool's functionality.
Describes the functions available in the Scan Panel.
Describes examples of specific scanning settings.
How to enhance text for better readability.
How to set auto color detection for mixed color/B&W documents.
How to scan mixed-size documents with auto-detection.
Important note on aligning documents for mixed-size scanning.
How to configure the scanner to skip blank pages.
How to scan large documents folded in half.
How to automatically correct slanted document pages.
How to reduce bleed-through and remove backgrounds.
How to omit specific colors like borders or lines.
How to reduce moire effects in scanned images.
How to automatically correct text orientation.
How to enhance red colors in B&W scans.
How to save scanned images as smaller PDF files.
How to convert document text for search keywords.
How to set security for PDF files.
Example for scanning both sides of pages.
Example for scanning irregular sized documents.
Example for combining multiple batches into one document.
Caution when removing documents to avoid cuts.
Important notes on removing jammed paper carefully.
Notes on error codes and rapid recovery system.
How to set the scanner for scanning long documents up to 1000mm.
Important notes for using Long Document mode.
How to access scanner properties via Control Panel (Category View).
How to access scanner properties via Control Panel (Classic View).
Important notes on selecting applications for scanner events.
How to select the scanner in CapturePerfect 3.0.
Overview of the driver properties dialog box tabs.
Procedure for setting scan modes to suit needs.
How to set automatic detection of color or B&W documents.
Notes on scanner recognition and default settings.
Procedure for selecting the page size for scanning.
Notes on TWAIN driver settings and scan modes.
Explains the auto detection of document color.
Mode for scanning text and line drawings as binary images.
Mode for scanning photos as black-and-white images.
Notes on specifying scan settings.
How to adjust color saturation and proportion for B&W scans.
Notes on auto-detection of document sizes.
Procedure for setting the resolution for scanning.
Notes on resolution, file size, and moire reduction.
Procedure for setting the page side settings for scanning.
Notes on simplex and duplex scanning.
Configures the scanner to skip blank pages.
Notes on content density and custom gamma settings.
Automatically corrects slanted document pages.
Note that deskewing may affect image quality or parts.
Reduces moire effects in scanned images.
Notes on high speed and quality moire reduction.
Defines the area of the document page to scan.
Notes on scan area dialog box differences.
Details the Scan Area dialog box for TWAIN drivers.
Setting linked to page size, custom page size registration.
Adjusting top, bottom, left, right margins.
Scanning a page and previewing it.
Adjusts the brightness and contrast for scanning.
Notes on availability and specifying brightness/contrast settings.
Adjusts the gamma level for scanning documents.
Notes on custom gamma settings.
Adjusts the contours of the scanned image.
Note on adjusting image contours towards soft or sharp.
Rotates the orientation of the scanned image.
Note on how scanned images are rotated.
Automatically corrects image orientation by detecting text direction.
Notes on text orientation recognition and application support.
Reduces bleed-through and removes backgrounds from document images.
Sets the bleed-through prevention or background removal level.
Omit borders and ruled lines of a specified color from the scanned image.
Note on color omission restrictions.
Enhances the color red when performing black-and-white scanning.
Note on red enhancement restrictions.
Sets the system recovery method used when document feeding stops.
Notes on rapid recovery system behavior.
Stops document feeding when double feeding is detected.
Notes on detecting double feeds by length or ultrasonic.
Procedure for selecting the method for feeding documents.
Notes on feeding methods.
Method for small batches of documents.
Method for different sized document batches.
Method for same-sized document batches.
Checks a scanned image and adjusts brightness and contrast.
Notes on using the Prescan window for adjustments.
Procedure for registering specified scanning conditions.
How to save and name custom scanning settings.
Procedure for checking the version of the ISIS/TWAIN driver.
How to check driver version and copyright information.
Procedure to start the Job Registration Tool.
Overview of the main Job Registration Tool dialog box.
Dialog box for setting up new or editing existing jobs.
Settings for saving scanned images to a file.
Settings for printing scanned images.
Settings for scanning and sending documents via email.
Common settings applicable to various job functions.
Explains the job numbering system.
How to enter a title for a registered job.
Option to save scanned images to a specified folder.
Saves images to the My Pictures folder.
Specifies a folder for saving scanned images.
Enters user name/password for shared network folders.
How to enter a name for saved files.
Selects the file format (PDF, BMP, TIFF, JPEG).
Opens dialogs for TIFF, PDF, JPEG settings.
Settings specific to PDF file saving.
Settings specific to JPEG file saving.
Specifies the printer and its settings.
Options to resize images for printing.
Explains the OK and Cancel buttons.
Important notes on selecting applications for scanner events.
Settings to monitor saved image folder capacity.
Specifies advance folder capacity and available space warnings.
Limits folder space by registering warning sizes.
Specifies a folder for monitoring available space.
Sets the maximum total size for files in a folder.
Settings to display job progress.
Displays the Monitor for DR-3010C dialog box.
Note on job title abbreviation.
Regular cleaning and maintenance for peak scanning quality.
Cautions regarding cleaning procedures and solvents.
Procedure for cleaning the exterior of the scanner.
How to clean dust and particles from the scanner interior.
How to clean the sensor glass and rollers.
Caution about spraying cleaners directly on the scanner.
Important note about scratches on sensor glass.
Caution about using excessive force during removal/attachment.
When rollers need replacement and the associated message.
Important notes about rollers as consumable parts.
Procedure for removing and attaching the feed roller.
Steps for attaching the feed roller correctly.
Procedure for removing and attaching the retard roller.
Caution when removing or attaching the retard roller.
Procedure for removing the retard roller.
Steps for attaching the retard roller correctly.
Procedure for removing and attaching the document holding guide.
Caution when removing or attaching the document holding guide.
Procedure for removing the document holding guide.
Steps for attaching the document holding guide correctly.
Lists common problems and their solutions.
Checks for power switch, cord connection, and outlet.
Checks for PC connection and driver installation.
Addresses causes of slow scanning, like background applications.
Checks for scanner/driver/application recognition.
Checks for static electricity or document size issues.
Reasons why image files might not open in other applications.
Covers unclear images, lines, smudges, or dirt.
Adjusting brightness for dark or faint images.
Addresses bleed-through or low brightness issues.
Checks scanning side settings (Simplex vs. Duplex).
Addresses document skew and guide adapter use.
Cleaning glass/rollers or checking for scratches.
Checks for dirty glass/rollers or scratches.
Explains error codes displayed on the scanner panel.
Error code for an open front unit.
Error code for a paper jam.
Error code for a double feed detection.
Steps to uninstall the driver and job tool.
Steps to uninstall CapturePerfect 3.0.
Lists the technical specifications of the scanner.
Details specifications for the main scanner unit.
Identifies the scanner as a desktop sheetfed scanner.
Specifies the document sizes the scanner can handle.
Information on ordering replacement parts like roller kits.
Provides the physical dimensions of the scanner.
Information regarding WEEE directive and product disposal.
Lists model names and their relation.
To Next Page