Canon imageCLASS LBP623Cdw - Important Safety Instructions; Installation

Safety-Related Symbols
Powerswitch:“ON”position
Powerswitch:“OFF”position
Powerswitch:“STAND-BY”position
Push-push switch “ON” “OFF”
Protective earthing terminal
Dangerousvoltageinside.Donotopencovers
other than instructed.
CAUTION:Hotsurface.Donottouch.
Class II equipment
Movingparts:Keepbodypartsawayfrommoving
parts
CAUTION:Anelectricalshockmayoccur.Remove
all the power plugs from the power outlet.
There are sharp edges. Keep body parts away from
sharp edges.
[NOTE]
Some of symbols shown above may not be
affixed depending on the product.
Consumables
WARNING
Donotdisposeofusedtonercartridgesinopen
flames. Also, do not store toner cartridges or
paper in a location exposed to open flames. This
may cause the toner or paper to ignite, and result
in burns or fire.
Notice
Product Name
Safety regulations require the product's name to
be registered.
In some regions where this product is sold, the
followingname(s)inparentheses()maybe
registered instead.
imageCLASSLBP623Cdw/LBP621Cw(F174900)
EMC requirements of EC Directive
ThisequipmentconformswiththeessentialEMC
requirementsofECDirective.Wedeclarethat
thisproductconformswiththeEMC
requirementsofECDirectiveatnominalmains
input230V,50Hzalthoughtheratedinputof
theproductis220to240V,50/60Hz.Useof
shielded cable is necessary to comply with the
technicalEMCrequirementsofECDirective.
•
Make sure that the power supply for the machine is
safe, and has a steady voltage.
•
Keepthepowercordawayfromaheatsource;failure
to do this may cause the power cord coating to melt,
resulting in a fire or electrical shock.
India E-Waste Rule
You can see the information about proper
handling equipment after use in the latest User's
Guide(HTMLmanual)fromtheCanonwebsite
(canon.com/oip-manual).
Wireless LAN Regulatory Information
Regulatory information for users in Argentina
Incluye módulo Wireless LAN Module Marca
muRata,ModeloType1KA,CNCC-17177
Regulatory information for users in Uruguay
imageCLASS LBP623Cdw / LBP621Cw contains
URSECapprovedWirelessLANModule(Model
name:Type1KA).
Regulatory information for users in Singapore
Complies with
IMDAStandards
DB00671
•
Donotmodify,pull,forciblybend,orperformany
otheractthatmaydamagethepowercord.Donot
placeheavyobjectsonthepowercord.Damagingthe
power cord may result in a fire or electrical shock.
•
Donotpluginorunplugthepowerplugwithwethands,
as this may result in an electrical shock.
•
Donotuseextensioncordsormulti-plugpowerstrips
withthemachine.Doingsomayresultinafireor
electrical shock.
•
Donotwrapthepowercordortieitinaknot,asthis
may result in a fire or electrical shock.
•
Insert the power plug completely into the AC power
outlet.Failuretodosomayresultinafireorelectrical
shock.
•
RemovethepowerplugcompletelyfromtheAC
poweroutletduringathunderstorm.Failuretodoso
may result in a fire, electrical shock, or damage to the
machine.
•
Make sure that the power supply for the machine is
safe, and has a steady voltage.
•
Keepthepowercordawayfromaheatsource;failure
to do this may cause the power cord coating to melt,
resulting in a fire or electrical shock.
Avoid the following situations:
If excessive stress is applied to the connection part of
the power cord, it may damage the power cord or the
wires inside the machine may disconnect. This could
result in a fire.
•
Connecting and disconnecting the power cord
frequently.
•
Tripping over the power cord.
•
The power cord is bent near the connection part, and
continuous stress is being applied to the power outlet
or the connection part.
•
Applying excessive force on the power plug.
CAUTION
Install this machine near the power outlet and leave
sufficient space around the power plug so that it can be
unplugged easily in an emergency.
Handling
CAUTION
Laser Safety
This product is confirmed as a Class 1 laser product in
IEC60825-1:2014andEN60825-1:2014.
CLASS1LASERPRODUCT
LASERKLASSE1
APPAREILÀLASERDECLASSE1
APPARECCHIOLASERDICLASSE1
PRODUCTOLÁSERDECLASE1
APARELHOALASERDECLASSE1
LUOKAN1LASER-TUOTE
LASERPRODUKTKLASS1
The laser beam can be harmful to human bodies. Since
radiation emitted inside the product is completely
confined within protective housings and external covers,
the laser beam cannot escape from the machine during
anyphaseofuseroperation.Readthefollowingremarks
and instructions for safety.
•
Never open covers other than those instructed in the
manuals for this machine.
•
If the laser beam should escape and enter your eyes,
exposure may cause damage to your eyes.
•
Use of controls, adjustments, or performance of
procedures other than those specified in this manual
mayresultinhazardousradiationexposure.
Laser Safety Caution
Important Safety Instructions
This manual describes only warnings and cautions for the
installation and the power supply. Be sure to read
"Important Safety Instructions" described in the User's
Guide also.
WARNING
Indicates a warning concerning operations that may
lead to death or injury to persons if not performed
correctly. To use the machine safely, always pay
attention to these warnings.
CAUTION
Indicates a caution concerning operations that may
lead to injury to persons if not performed correctly. To
use the machine safely, always pay attention to these
cautions.
IMPORTANT
Indicates operational requirements and restrictions.
Be sure to read these items carefully to operate the
machine correctly and avoid damage to the machine
or property.
Installation
To use this machine safely and comfortably, carefully read
the following precautions and install the machine in an
appropriate location.
WARNING
Do not install in a location that may result in a fire or
electrical shock
•
A location where the ventilation slots are blocked (too
closetowalls,beds,sofas,rugs,orsimilarobjects)
•
A damp or dusty location
•
A location exposed to direct sunlight or outdoors
•
A location subject to high temperatures
•
A location exposed to open flames
•
Near alcohol, paint thinners or other flammable
substances
Other warnings
•
Donotconnectunapprovedcablestothismachine.
Doingsomayresultinafireorelectricalshock.
•
Donotplacenecklacesandothermetalobjectsor
containers filled with liquid on the machine. If foreign
substances come in contact with electrical parts inside
the machine, it may result in a fire or electrical shock.
•
If any foreign substance falls into this machine, unplug the
power plug from the AC power outlet and contact your
localauthorizedCanondealer.
CAUTION
Do not install in the following locations
The machine may drop or fall, resulting in injury.
•
An unstable location
•
A location exposed to vibrations
Other cautions
•
When carrying this machine, follow the instructions in
this manual. If carried improperly, it may fall, resulting
in injury.
•
When installing this machine, be careful not to get your
hands caught between the machine and the floor or
walls.Doingsomayresultininjury.
Avoid poorly ventilated locations
Thismachinegeneratesaslightamountofozoneand
other emissions during normal use. These emissions are
not harmful to health. However, they may be noticeable
during extended use or long production runs in poorly
ventilated rooms. To maintain a comfortable working
environment, it is recommended that the room where
the machine operates be appropriately ventilated. Also
avoid locations where people would be exposed to
emissions from the machine.
Power Supply
WARNING
•
Use only a power supply that meets the specified
voltagerequirements.Failuretodosomayresultina
fire or electrical shock.
•
The machine must be connected to a socket-outlet
with grounding connection by the provided power
cord.
•
Donotusepowercordsotherthantheoneprovided,asthis
may result in a fire or electrical shock.
•
The provided power cord is intended for use with this
machine.Donotconnectthepowercordtoother
devices.
AppendixAppendix
34
En