Canon imageCLASS LBP623Cdw - Configuring the Machine

Configuring the Method of
Connecting to a Computer
1.
2.
Configure the initial settings, according to the
screen.
•Setthelanguageandcountry/region.
•Setthetimezoneandcurrentdate/time.
•Configurethesettingstopreventunauthorized
access.
•Forthepurposeofconfirmation,enterthe
same PIN twice.
Before starting the configuration
•Themachinecannotbeconnectedtoboth
wired and wireless LANs at the same time.
•Ifthemachineisconnectedtoan
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
•Themachinedoesnotcomewitha
router. Please have one ready, if necessary.
•Eveninanenvironmentwithoutwireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device(DirectConnection).
User's Guide
Specifying the connection method
NoYes
Use wireless LAN to
connect to network?
(Can config. later.)
•ToconnectviawirelessLAN:<Yes>
•ToconnectviawiredLANorUSB:<No>
To connect via wireless LAN
1.
Make sure that the computer is connected to a
router properly.
2.
Check the network settings on the computer.
NOTE
Parts and functions of the operation panel
P.30 "Start the Operation from the Operation
Panel"
Configuring the Initial Settings of
the Machine
6
Configuring the Machine
Configure the settings in the following order.
Quick Setup
En