Canon imageCLASS MF262dw II - [Timer;Energy Settings]

[Timer/Energy Settings]
8W0J-09E
Set the date and time and specify the Ener
gy Saver settings.
* Values in bold red text are the default settings for each item.
[Quiet Mode Time](P. 434)
[Current Date/Time Settings](P. 434)
[Date/Time Settings](P. 434)
[Date Format](P. 435)
[Time Format](P. 435)
[Auto Reset Time](P. 435)
[Function After Auto Reset](P. 436)
[Auto Sleep Time](P. 436)
[Quiet Mode Time]
[Menu] [Preferences] [Timer/Energy Settings]
Specify the period of time wher
e the machine enters and exits the quiet mode in order to reduce the operation sound
of the machine.
Reducing the Operation Sound (Quiet Mode)(P. 197)
[Off]
[On]
[Start Time]
0:00 to 12:59 AM/PM
[End Time]
0:00 to 12:59 AM/PM
[Current Date/Time Settings]
[Menu] [Preferences] [Timer/Energy Settings]
Set the date and time for the machine. The date and time set her
e are used as a reference for the functions that use
date and time information.
Setting the Date and Time(P. 397)
Befor
e conguring this setting, check that the correct time zone is selected.
[Date/Time Settings](P. 434)
* The curr
ent date and time cannot be changed for one hour after Daylight Saving Time is set.
[Date/Time Settings]
[Menu] [Preferences] [Timer/Energy Settings]
Set the time zone (UTC
*1
) and Daylight Saving Time accor
ding to the region where the machine is installed.
*1
The UTC (Coordinated Universal Time) is a coordinated universal time that is standard for all parts of the world. Internet-
based communication relies on the UTC being set correctly.
* Depending on your country or region, the [Date/Time Settings] setting may not be displayed, or its content or default
setting may be differ
ent.
Settings Menu Items
434