Canon imageCLASS MF634Cdw - Page 483

<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special
Processing> <Reduce Ppr. Sticking at Output> <On> <Yes>
<High Humidity Mode>
Print density may be uneven when the machine is used in an environment with high humidity. In this case,
setting this item to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <High
Humidity Mode> <On> <Yes>
● If you set to <On> and use the machine in an environment with low humidity, printed images and text
may be blurry.
<Low Humidity Mode>
When using the machine in an environment with low humidity, printed images and text may be blurry. In this
case, setting this item to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Low
Humidity Mode> <On> <Yes>
● If you set to <On>, print density may be lower or uneven when the machine is used in an environment
with high humidity.
<Reduce Ghosting 1>
*
If the printout reveals a ghost of an image in the same page, setting this item to <On> may solve the problem.
<Off>
<On>
Setting Menu List
475