Need help?Do you have a question about the Canon imageFORMULA CR-L1 and is the answer not in the manual?
General| Color scanning | Yes |
|---|---|
| Grayscale levels | 256 |
| Maximum scan size | 108 x 228 mm |
| Output color depth | 24 bit |
| ADF scan speed (b/w, A4) | - ppm |
| Optical scanning resolution | 300 x 300 DPI |
| Product color | Black, Grey |
| Built-in display | No |
| Sensor type | CMOS CIS |
| Daily duty cycle (max) | 3000 pages |
| Card thickness (max) | 0.2 mm |
| Media thickness (min) | 0.08 mm |
| Maximum ISO A-series paper size | - |
| Auto Document Feeder (ADF) media weight | 64 - 157 g/m² |
| USB version | 2.0 |
| Standard interfaces | USB 2.0 |
| Bundled software | Ranger driver + IQA, Canon Scanning Utility |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (sleep) | 2.3 W |
| Power consumption (typical) | 15.8 W |
| Operating temperature (T-T) | 10 - 32.5 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Server operating systems supported | Windows Server 2008 R2, Windows Server 2012 R2, Windows Server 2016 |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8.1 |
Weight and Dimensions| Depth | 223 mm |
|---|---|
| Width | 140 mm |
| Height | 188 mm |
| Weight | 2100 g |
Compliance with US Federal Communications Commission rules for 120V models.
Lists registered trademarks of Canon and other companies.
Copyright notice, reproduction restrictions, and warnings against illegal reproduction.
Step-by-step guide for initial scanner setup.
Instructions for installing the Scanning Utility software.
Details on connecting the scanner via USB.
Procedure for powering the scanner on.
Procedure for powering the scanner off.
Lists the manuals provided with the CR-L1 scanner.
Explains the meaning of symbols used in the manual.
Precautions for safely handling the scanner and its components.
Guidelines for disposing of the scanner responsibly.
Overview of the CR-L1 scanner's capabilities and functions.
Detailed list of scanner features like speed, size, and scanning modes.
Identifies and describes the parts on the front of the scanner.
Details the ink cartridge, magnetic head, and rollers.
Identifies parts on the rear, including connectors and power switch.
Provides the physical dimensions of the scanner.
Information about the ink cartridge required for the imprinter.
Instructions for installing the ink cartridge and setting print position.
Guide on launching and using the Scanning Utility software.
Describes types of documents and their specifications for scanning.
Explains the double feed detection feature and its settings.
Instructions on how to load documents correctly into the scanner.
Step-by-step guide for performing a scan.
Procedure to verify correct document separation and feeding.
Instructions for scanning documents longer than standard sizes.
Causes and remedies for the computer not recognizing the scanner.
Step-by-step guide to safely remove jammed paper.
Troubleshooting steps if the scanner fails to power on.
Diagnosing and resolving document feeding issues.
Solutions for scanned images that are not sharp or have issues.
Routine cleaning procedures for optimal performance.
How to clean the exterior of the scanner.
Procedures for cleaning internal dust and particles.
Instructions for cleaning the glass and rollers for image quality.
How to clean magnetic heads for MICR reading.
Procedures to clean ink jet nozzles for imprinter quality.
Instructions for using cleaning cards for scanner maintenance.
Steps for replacing the ink cartridge when needed.
How to adjust the roller gap for proper document feeding.
Detailed technical specifications of the CR-L1 scanner.
Specifications for the AC adapter used with the scanner.
Explains the meaning of safety symbols on the machine.
Details the meaning of various safety symbols like heat hazard and Class II equipment.
Explains DC symbols, polarity, and electrostatic precautions.
To Next Page