When you select By entering values directly in Setting Method
A Setting Method
You can choose configuration based on the printed Chart or based on using the i1 colorimeter.
B Lighting Source Type
Select the light source measured using the i1 colorimeter.
D Color Temperature
Enter the Color Temperature measured using the i1 colorimeter.
E Illuminance
Enter the Illuminance measured using the i1 colorimeter.
Displayed when the A Matching Method is set to Monitor Matching on the Matching sheet.
Note
• For details on settings items, see "Adjusting the Color in the Printer Driver →P.42 "
Windows Software
>
Printer Driver
>
iPF6300 Ambient Light Adjust dialog box
4
221
To Next Page
Loading...
Need help?
General