4. Insert the Holder Stopper from the left in the Roll Holder as shown. Push it firmly in until the flange (a) of the Hold-
er Stopper touches the roll.
Attach the appropriate Holder Stopper for the size of the paper core.
Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Important
• Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be
advanced correctly when you turn the printer on.
Note
• Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If
these areas are dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.")
→P.927
1. Press the Load button.
Handling Paper
>
Handling rolls
>
Loading Rolls in the Printer iPF6300
6
722
To Next Page
Loading...
Need help?
General