Important
• When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed
documents may not be dropped into the Output Stacker, and the printed surface may become soiled.
• The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed.
Use the Output Stacker in the regular position (a).
The stacker may also be used in the extended position (b) for some types of paper. To switch to the extended position, move
the Support Rod to position (b). The extended position enables easy removal after printing.
For information on types of paper you can use with the stacker in extended position, refer to the Paper Reference Guide.
(See "Types of Paper.") →P.712
Handling Paper
>
Output Stacker
>
Using the Output Stacker iPF6300
6
760
To Next Page
Loading...
Need help?
General