Important
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off
and transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink
tanks, and follow this procedure again.
2. Disconnect the power cord and interface cable.
3. Open the Top Cover.
4. Pinch the Belt together, insert it between the Belt Stopper, and affix the Belt Stopper to the Carriage Shaft.
Maintenance
>
Other Maintenance
>
iPF6300 Preparing to Transfer the Printer
10
935
To Next Page
Loading...
Need help?
General