29
If Banding Occurs
3
4
5
6
7
Press ▲ or ▼ to select Adjust Printer , and then press
the ► button.
Press ▲ or ▼ to select Auto Band Adj. , and then press
the ► button.
Press ▲ or ▼ to select Standard Adj. or Advanced Adj. ,
and then press the ► button.
Press ▲ or ▼ to select Yes , and then press the OK
button.
A test pattern is printed for band adjustment.
Adjustment is now fi nished if you have printed on a roll or
a sheet of A2 size or larger.
If you are printing on sheets smaller than A2 size for
Standard Adj. , a confi rmation message is shown on the
Display Screen requesting you to continue printing. Press
the OK button and follow the instructions on the Display
Screen .
To Next Page