32
Error messages
Check the message and take the appropriate action.
Before borderless printing, move the blue platen switch. •
Blue platen switch is dirty. •
Borderless printng not possible. •
Borderless printng not possible. Paper stretched or shrank. •
Cannot adjust band. •
Cannot adjust printhead. •
Cannot print as selected. Another roll is in use. •
Cannot print as specifi ed. •
Close Ink Tank Cover •
End of paper feed. •
ERROR Exxx-xxxx (x represents a letter or number) •
File read error. •
GARO Wxxxx (x represents a number) •
GL2: W0502 The parameter is out of range. •
GL2: W0504 This command is not supported. •
GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) •
Hard disk error. •
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) •
Ink insuffi cient. •
No ink left. •
Ink tank is empty. •
Insert the maintenance cartridge. •
Insuffi cient paper for job •
Mail box full. Now printing without saving data. •
Mail box nearly full. •
Maintenance cartridge full. •
Maintenance cartridge problem. •
Maximum jobs stored. •
Media take-up unit ready. •
Multi-sensor error •
No ink tank loaded. •
No Maintenance Cartridge capacity. •
No printhead •
Not much ink is left. •
Paper cutting failed. •
Paper jam. •
Paper loaded askew. •
Paper size not detected. •
Papr Type Mismatch •
PaprTypeMismatch •
Parts replacement time has passed. •
PHead needs cleaning. •
Prepare for maint cart replacement. •
Prepare for parts replacement. •
Error Messages
Respond to error messages as follows.
No Roll Unit. •
Execute printhead cleaning. •
To Next Page
Loading...
