Canon ImagePrograf iPF840 series - Troubleshooting When Paper Jams Are Not Found

6
If the Carriage is on the left, move the Carriage to the
right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur
when you turn on the printer.
7
Lower the Release Lever and close the Top Cover.
8 Turn the printer on. (See "Turning the Printer On and Off.") ➔User's Guide
Troubleshooting When Paper Jams are not Found
Troubleshooting When Paper Jams are not Found
If you cannot find a paper jam, search for the paper as follows.
1 Turn the printer off. (See "Turning the Printer On and Off.") ➔User's Guide
2 Remove the Wheeled Output Stacker from the printer. (See "Using the Wheeled Output Stack-
er.") ➔User's Guide
3
Holding the Roll Unit Lever (a), pull out the Roll Unit.
a
Troubleshooting When Paper Jams are not Found iPF840 Series
Basic Guide
Troubleshooting Problems Regarding Paper
102