To Next Page

To Previous Page

Handling Paper

Handling rolls

Attaching the Roll Holder to Rolls .................................................................................................................... 12

Loading Rolls in the Printer ............................................................................................................................. 15

Removing the Roll from the Printer .................................................................................................................. 21

Attaching the Roll Holder to Rolls

When printing on rolls, attach the Roll Holder to the roll.

Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes

equipped with the 2-Inch Paper Core Attachment installed.

Using the 2-Inch Paper Core Attachment Using the 3-Inch Paper Core Attachment

Roll Holder Side Holder Stopper Side Roll Holder Side Holder Stopper Side

No Attachment Needed 2-Inch Paper Core Attachment 3-Inch Paper Core Attachment #1 3-Inch Paper Core Attachment #2

Caution

•

Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may

cause injury.

Attaching the Roll Holder to Rolls