Important
•
When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recom-
mend wearing clean cloth gloves when handling rolls to protect the printing surface.
•
Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding problems
and affect the printing quality. Be careful not to cut through any barcodes printed on the roll.
•
Align the edges of the paper on both ends of the roll. This may cause feeding problems.
Note
•
For details on supported sizes and types of roll paper, see Paper Sizes or the Paper Reference Guide. (See
"Paper Sizes.") ➔User's Guide (See "Displaying the Paper Reference Guide.") ➔ User's Guide
•
To view instructions as you attach the Roll Holder, press the Navigate button. (See "How to View Instructions With
Navigate.") ➔User's Guide
1
Lift the Holder Stopper lever (a) from the shaft side to
unlock it. Holding the Holder Stopper at the position
indicated (b), remove it from the Roll Holder.
iPF840 Series
Attaching the Roll Holder to Rolls
Basic Guide
Handling Paper Handling rolls
13
To Next Page
Loading...
Need help?
General