EasyManuals Logo

Canon ImagePrograf iPF840 series User Manual

Canon ImagePrograf iPF840 series
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
"Manually rewind the roll all the way and press OK."
Cause Corrective Action
A paper jam occurred
when advancing the pa-
per.
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
"Lift the release lever and remove the paper."
Cause Corrective Action
A paper jam occurred in the printer during printing. Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.") P.97
(See "Clearing a Jammed Sheet.") P.100
Roll x jam (x is 1 (Upper) or 2 (Lower))
Roll x jam (x is 1 (Upper) or 2 (Lower))
"Lift the release lever."
Cause Corrective Action
A paper jam occurred
in the printer during
printing.
1.
Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.") P.97
(See "Clearing a Jammed Sheet.") P.100
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
"Manually rewind the roll all the way and press OK."
Cause Corrective Action
A paper jam occurred
when advancing the pa-
per.
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Paper loaded askew.
Paper loaded askew.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. Lift up the Release Lever and reload the
paper.
(See "Loading Rolls in the Print-
er.") P.15
(See "Loading Sheets in the Print-
er.") P.25
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
(See "Attaching the Roll Holder to
Rolls.") P.12
iPF840 Series
Roll x jam (x is 1 (Upper) or 2 (Lower))
Basic Guide
Error Message Messages regarding paper
131

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon ImagePrograf iPF840 series and is the answer not in the manual?

Canon ImagePrograf iPF840 series Specifications

General IconGeneral
BrandCanon
ModelImagePrograf iPF840 series
CategoryPrinter
LanguageEnglish

Related product manuals