2
Lift the Release Lever and open the Top Cover.
Important
•
Do not touch the Linear Scale (a), Carriage
Shaft (b), or Ink Tube Stabilizer (c). Touching
these parts may damage them.
3
With a sheet lengthwise and printing-side up, insert it between the Platen (a) and the Paper Retainer (b).
Align the edges of the sheet as follows.
1.
Align the sheet with the Paper Alignment Line (c) at right.
2.
Align the inserted edge of the sheet with the leading edge of the Paper Alignment Line (d), as shown.
Loading Sheets in the Printer
iPF840 Series
Basic Guide
Handling Paper Handling sheets
26
To Next Page
Loading...
Need help?
General