2
At this point, open the Maintenance Cartridge Cover.
3
Hold the used Maintenance Cartridge by the grip (a)
with one hand and put your other hand under the
Maintenance Cartridge to hold it firmly on the bottom,
keeping it level as you pull it out.
Important
•
Used maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge level
during removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may
leak and cause stains.
•
The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Main-
tenance Cartridge in another printer.
4
Keep the used Maintenance Cartridge level as you
put it in the plastic bag. Expel excess air from the
plastic bag and seal the zipper.
5
Confirm the Maintenance Cartridge is right-side up,
put it in the box with the packaging material attached,
and store it so that it stays level.
Replacing the Maintenance Cartridge
iPF840 Series
Basic Guide
Consumables and Maintenance Maintenance Cartridge
48
To Next Page
Loading...
Need help?
General