2
Press the ▲ or ▼ button to enter the value.
Note
•
Hold down ▲ or ▼ to increase or decrease the value continuously.
3
Repeat steps 1 and 2 to complete the settings, and then press the OK button.
Note
•
If a confirmation message is displayed regarding the setting you entered, follow the on-screen instruc-
tions.
•
If you have changed the Interface Setup menu settings, a message confirming whether to register the
settings is displayed if you press Back button or Menu button. Follow the instructions shown on the
screen.
Executing menu commands
Menu commands can be executed as follows.
1
Press ▲ or ▼ to select the action to execute, and then press the OK button.
The menu command is now executed.
iPF840 Series
Menu Operations
Basic Guide
Printer Parts Operations and Display Screen
59
To Next Page
Loading...
Need help?
General