Important
•
Do not touch the Linear Scale (a), Carriage
Shaft (b), or Ink Tube Stabilizer (c). Touching
these parts may damage them.
4
If the Cutter is out, move the Cutter to the right side,
away from the paper.
Important
•
If the Cutter is on the left side, be sure to move it to the right. If the Cutter is on the left side when you
turn the printer on, the printer may rip the paper.
5
Lift the Release Lever.
Clearing Jammed Roll Paper
iPF840 Series
Basic Guide
Troubleshooting Problems Regarding Paper
98
To Next Page
Loading...
Need help?
General