Canon imagePROGRAF TM-200

Canon imagePROGRAF TM-Series Service Guide
imagePROGRAF TM-Series Service Guide June 2021
Revision 4 Page 37
X. Appendix
A. Specifications
Note: All specifications are subject to change without notice.
Table 32 - imagePROGRAF TM-305/TM-300/TM-200 Specifications
Item
Specification
Model
imagePROGRAF
TM-305
imagePROGRAF
TM-300
imagePROGRAF
TM-200
Class
36-inch
24-inch
Ink Type
Pigment inks /5 color MBK/BK/C/M/Y
Printhead
PF-06
Maximum Print Resolution
Up to 2400×1200dpi
Power
Supply
Input power
AC 100-240V
（
50-60Hz
）
Power consumption
(using wired LAN)
69 W maximum
Sleep mode
(using wired LAN)
3.6 W maximum
Sleep mode
(using all ports)
3.6 W maximum
At power off
0.3 W maximum
Default setting for the
time to enter Sleep
mode
Approximately 300 seconds
Operational Environment
Temperature: 59 - 86°F (15 to 30°C),
Humidity: 10 - 80 % (No dew condensation)
Acoustic
Noise
(Measured
on ISO7779
standard)
Acoustic pressure
Operation: 44 dB(A) or less (Plain paper, line drawing, standard
mode)
Stand by: 35 dB(A) or less
Acoustic power
Operation: 6.0 bels or less (Plain paper, line drawing, standard
mode)
Detector
and
Adjustment
Registration
adjustment
Automatic / Manual
Banding adjustment
Automatic / Manual
Line length
adjustment
Manual
Head slant
adjustment
Manual
Color calibration
No
Head gap adjustment
Automatic / Manual (8 levels)
Non-firing detection
Auto
Non-firing
compensation
Auto
Roll media remaining
detection function
Barcode print, Auto
Line Accuracy
Approximately ±0.1 % or less
User adjustments necessary. Printing environment and media
must match those used for the adjustments.