Error Messages and Remedies
8-2
8
Troubleshooting
Error Messages and Remedies
The following describes how to deal with error messages displayed by the machine.
<Check the network connection.> is displayed on the control panel.
Cause 1 : The machine and cable are not properly connected.
Remedy : Turn the machine’s power switches to OFF, check that the machine is connected
to the network using the proper cable, and then turn them to ON again. (See the
Printer Setup Guide.)
201std(US)NWG.book Page 2 Wednesday, January 30, 2002 7:10 PM
To Next Page
Loading...
Need help?
General