Canon imageRUNNER 2318 User Manual

Basic Copying
2-12
Basic Operations
2
Basic Copying
This section describes the flow of basic copy operations.
NOTE
• For instructions on turning ON the machine, see “Main Power and Control Panel Power,”
on p. 1-15.
• For instructions on routine maintenance, see Chapter 6, “Routine Maintenance,” in the
Reference Guide.
• The output quality may deteriorate if the platen glass is dirty. Always keep the platen
glass clean.
• Do not touch the optional feeder or platen cover while copying. Rocking the feeder or
platen cover may distort the image being copied.
1 Press the appropriate keys in accordance with the messages
displayed on the LCD display.
If there are no messages displayed, proceed to step 2.
● If the message <Dept. ID/Pass Input> appears:
NOTE
For instructions on using Department ID Management, see Chapter 4, “System Manager Settings,”
in the Reference Guide .
❑ Enter your Department ID (up to seven
digits) using - (numeric keys).
❑ Use [ ] or [ ] to select <Password:> ➞
enter the password (up to seven digits)
using - (numeric keys).
❑ Press (ID).
ID Key after Input
When done press ID key
Dept. ID:0000001
Password:
Dept. ID/Pass Input
Dept. ID/Pass Input
Password:*******
ID Key after Input
When done press ID key
Dept. ID:0000001

Canon imageRUNNER 2318 Specifications

General

Print Technology	Laser
Type	Monochrome Multifunction Printer
Functions	Print, Copy, Scan
Print Speed	18 ppm
Print Resolution	600 x 600 dpi
First Print Time	7.9 seconds
Paper Capacity	250 sheets
Paper Input (Standard)	250-sheet cassette, 80-sheet multi-purpose tray
Duplex Printing	Manual
Copy Speed	18 cpm
Copy Resolution	600 x 600 dpi
Multiple Copy	Up to 99 copies
Scan Resolution	600 x 600 dpi
Interface	USB 2.0
Warm-up Time	13 seconds
Paper Output	100 sheets
Paper Sizes	A4, A5, B5, Legal, Letter
Paper Weight	64-90 g/m²
Zoom	50 - 200%
Scan Destinations	PC
Power Consumption	Approx. 1.2 kW