English
41 Flow of Basic Operations 2
How to Make a Copy
This section describes the ow of basic copy operations.
1
Placing Originals
●
Place the original on the feeder
or the platen glass
.
Placing originals in the feeder
•
Adjust the slide guides to t the size of your
originals. Neatly place your originals with the
side to be copied face up.
Placing originals on the platen glass
•
Open the feeder.
• Place your originals face down.
2
Selecting Function
●
Select [Copy] from the Main
Menu screen.
• Press [Copy].
• Copy Basic Features Screen is displayed.
You can set various copying functions. For more
information, see e-Manual > Copy.
3
Setting the Number of Copies
●
Enter the number of copies.
• Press the numeric keys to enter the desired copy
quantity (1 to 999).
4
Start Copying
●
After specifying the settings,
press
.
• Press .
• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/PIN). If the
Copy Card Reader-F1 is attached, rst insert a control card.
• If a login service, such as Department ID Management or SSO-H has been set, press (Log In/Out) to log out.
To Next Page
Loading...
Need help?
General
