xxi
Maintenance and Inspections
When cleaning the machine, first turn OFF the main power switch, then disconnect the power cord. Failure to observe these
steps may result in a fire or electrical shock.
Disconnect the power cord from the power outlet regularly, and clean the area around the base of the power plug's metal pins
and the power outlet with a dry cloth to ensure that all dust and grime is removed. If the power cord is connected for a long
period of time in a damp, dusty, or smoky location, dust can build up around the power plug and become damp. This may
cause a short circuit and result in a fire.
Clean the machine using a slightly dampened cloth with a mild detergent mixed with water. Do not use alcohol, benzene,
paint thinner, or other flammable substances. Check detergent for flammability prior to use. If flammable substances come
into contact with a high-voltage area inside the machine, it may result in a fire or electrical shock.
There are some areas inside the machine which are subject to high-voltages. When removing jammed paper or when
inspecting the inside of the machine, do not allow necklaces, bracelets, or other metal objects to touch the inside of the
machine, as this may result in burns or electrical shock.
Do not burn or throw used toner cartridges into open flames, as this may cause the toner remaining inside the cartridges to
ignite, resulting in burns or a fire.
Make sure that the power plug is firmly inserted into the power outlet after cleaning the machine. Do not use the machine
while the connection is loose, as doing so may cause a fire.
Check the power cord and power plug regularly. If the following conditions occur, contact your local authorized Canon dealer,
as the condition may cause a fire:
There are burn marks on the power plug.
The blade on the power plug is deformed or broken.
The power goes OFF and ON when the power cord is bent.
There are cuts, cracks, or indentations on the power cord.
A part of the power cord becomes hot.
Check the power cord and power plug regularly to make sure that they are not handled in the following manner, as this may
result in a fire or electrical shock:
The connection part of the power plug is loose.
Stress is being applied to the power cord by a heavy object or by affixing it with staples.
The power plug is loose.
The power cord is tied in a bundle.
The power cord protrudes into a walkway.
The power cord is in front of a heater.
The fixing unit and its surroundings inside the machine may become hot during use. When removing jammed paper or when
inspecting the inside of the machine, do not touch the fixing unit and its surroundings, as doing so may result in burns or
electrical shock.
When removing jammed paper or when inspecting the inside of the machine, do not expose yourself to the heat emitted
from the fixing unit and its surroundings for a prolonged period of time. Doing so may result in low temperature burns, even
though you did not touch the fixing unit and its surroundings directly.
If a paper jam occurs, follow the directions on the touch panel display to remove any jammed paper from inside the machine.
Do not insert your fingers into any parts not indicated on the touch panel display, as doing so may result in personal injury or
burns.
DO NOT TOUCH.
It may cause burns.
•
•
•
•
•
•
•
-
-
-
-
-
•
-
-
-
-
-
-
•
•
•
To Next Page
Loading...
Need help?
General
