● If you load free size paper, or if the displayed size or type is differ
ent from the actual paper that is loaded, see
Specifying Paper Size and Type in the Multi-Purpose Tray(P. 156) .
● A paper jam or other printing problems may occur if the size and type of paper specied
in the printer
driver do not match those of the actual paper loaded in the multi-purpose tray.
TIPS
Printing on the back side of printed paper (2nd Side of 2-Sided Page)
● You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
multi-purpose tr
ay, with the side to print face down (previously printed side face up). Then press <Manual
Back Side Print (2-Sided Only)> on the screen for selecting the paper type.
● Use only the paper printed with this machine.
Loading Transparencies
You can load A4 size transparencies in the paper drawers or in the multi-purpose tray. When loading
transparencies, note the following points.
● It is recommended that you load transparencies one sheet at a time.
● If you leave transparencies loaded in the paper drawers or in the multi-purpose tray, the sheets may stick
together and cause a multiple sheet feed or a paper jam. When printing is complete, return the remaining
transparencies to their original package for storage, avoiding locations subject to high temperatures and
humidity.
LINKS
Specications(P. 714)
Basic Operations
140
To Next Page
Loading...
Need help?
General
