Need help?Do you have a question about the Canon Inner Finisher-J1 and is the answer not in the manual?
Explains symbols used throughout the Service Manual.
Lists the main features and capabilities of the finisher.
Details the technical specifications of the finisher unit.
Identifies and names the various parts of the finisher.
Overview of the finisher's fundamental structural components.
Details the various controls and their functions within the finisher.
Explains the fundamental operational procedures of the finisher.
Describes the function and components of the feed unit.
Details the processing tray unit and its operations.
Explains the process of stapling sheets of paper.
Describes the process of stapling paper without using staples.
Explains how the finisher detects and reports paper jams.
Explains the power supply and its distribution to finisher components.
Important considerations before replacing parts of the machine.
Procedures for removing the finisher from the host machine.
Lists all motors with their part names and locations.
Lists all sensors and switches with their part names and locations.
Steps involved in removing the processing tray unit.
Detailed procedure for removing the main controller PCB.
General introduction to adjustment procedures and settings.
Details service mode adjustments and functional settings.
Procedures for handling replacements of the finisher controller PCB.
Checks to perform before installing the finisher.
Step-by-step instructions for installing the finisher.
Detailed steps for installing the inner finisher unit.
Procedures to confirm the successful installation.
Lists specialized tools required for service.
Provides the complete electrical circuit diagram for the finisher.
To Next Page
General
