How to adjust staple position on Canon Staple Finisher-AA1 Finishers?
If the staple position is displaced in the front/rear direction when using the front/rear 1-stapling mode or 2-stapling mode on your Canon Finishers, you may need to adjust the staple position. Please refer to “Adjusting the Staple Position ” on page 158 for detailed instructions.
How to adjust saddle stitch position on Canon Staple Finisher-AA1?
If you're experiencing issues with the saddle stitch position in the saddle stitch mode on your Canon Finishers, you might need to adjust the saddle stitch position. Please see “Adjusting the Saddle Stitch Position ” on page 171 for guidance.
How to fix front/rear misalignment on Canon Finishers?
If you notice misalignment occurring in the front/rear direction with your Canon Finishers, consider adjusting the stacker alignment position. Refer to “Adjusting Stacker Alignment Position” on page 149 for instructions.
How to adjust feed direction misalignment on Canon Staple Finisher-AA1?
If you are experiencing misalignment in the feed direction with your Canon Finishers, you may need to adjust the return roller/swing unit height. See “Adjusting the Return Roller/Swing Unit Height ” on page 155 for instructions.
What to do if center alignment is misaligned on Canon Staple Finisher-AA1 Finishers?
If the standard position for the center alignment is misaligned on your Canon Finishers, you should adjust the center alignment standard position. Please consult “Adjusting Center Alignment Standard Position ” on page 150 for guidance.
How to fix front/rear direction misalignment on Canon Staple Finisher-AA1 Finishers saddle alignment plate?
If misalignment occurs in the front/rear direction on your Canon Finishers, consider adjusting the saddle alignment plate position. Refer to “Adjusting the Saddle Alignment Plate Position ” on page 165 for instructions.
How to resolve feed direction misalignment on Canon Staple Finisher-AA1 Finishers?
If misalignment occurs in the feed direction on your Canon Finishers, you may need to adjust the fold placement. Please refer to “Adjusting the Fold Placement ” on page 164 for detailed instructions.
How to adjust staple-free binding position on Canon Finishers?
If you're having trouble with the staple-free binding position in the staple-free binding mode on your Canon Finishers, it may be necessary to adjust the staple-free binding position. Please see “Adjusting the Staple-Free Binding Position ” on page 161 for detailed instructions.
How to correct misaligned stitch positions on Canon Finishers?
If the stitch positions of the front and rear sides become misaligned on your Canon Finishers, consider adjusting the stitcher unit installation position. See “Adjusting the Stitcher Unit Installation Position ” on page 167 for instructions.
How to adjust stapler unit after replacement on Canon Finishers?
After replacing the stapler unit on your Canon Finishers, you should adjust the stapler unit installation position. Please refer to “Adjusting the Stapler Unit Installation Position ” on page 159 for guidance.
General| Type | Staple Finisher |
|---|---|
| Compatibility | Canon imageRUNNER ADVANCE series |
| Staple Positions | Corner, Double |
| Punching | Optional 2/3 hole punch unit |
| Staple Media Sizes | A4, Letter, Legal, Ledger, A3, 11" x 17" |
| Paper Weight | 52 to 300 gsm |
| Power Requirements | AC 100-240 V, 50/60 Hz |
To Next Page
