What to do if staple position is displaced in Canon Inner Finisher-K1?
If the staple position in front/rear direction is displaced in the front/rear 1-stapling mode or 2-stapling mode, you can find the solution in “Adjusting the Staple Position” on page 81.
What to do if misalignment occurs in feed direction in Canon Printer Accessories?
If misalignment occurs in the feed direction, refer to “Adjusting the Return Belt Pressure” on page 80 for a solution.
How to fix misalignment in front/rear direction in Canon Inner Finisher-K1 Printer Accessories?
If misalignment occurs in the front/rear direction, consult “Adjusting Stacker Alignment Position” on page 73 to resolve the issue.
What to do when the standard position for the center alignment is misaligned in Canon Inner Finisher-K1?
If the standard position for the center alignment is misaligned, see “Adjusting Center Alignment Standard Position” on page 77 for instructions.
What to do when the stapler unit is replaced in Canon Inner Finisher-K1?
If the stapler unit is replaced, you can find the solution in “Adjusting the Stapler Unit Installation Position” on page 82.
How to adjust staple-free binding position in Canon Printer Accessories?
To adjust the staple-free binding position in the staple-free binding mode, refer to “Adjusting the Staple-Free Binding Position” on page 84.
Explains the symbols used throughout the Service Manual to aid in understanding procedures and components.
Details safety guidelines for using the power supply and extension cords to prevent hazards.
Provides essential precautions to follow before starting any servicing procedures on the machine.
Outlines crucial points to observe when performing cleaning, especially with solvents.
Lists essential steps and precautions for safe assembly and disassembly of the device.
Advises on proper screw tightening, especially for thin plates, to avoid damage.
Highlights the key functionalities and capabilities of the finisher.
Details the technical specifications of the finisher, including paper handling and capacities.
Identifies and labels the main parts of the finisher for easy reference.
Describes the main blocks and electrical circuitry of the finisher.
Lists the controls and their corresponding operations within the finisher.
Explains the fundamental operations of the finisher, including paper feeding and stacking.
Details the finisher's initialization sequence based on different operational statuses.
Explains the function and components of the feed unit.
Describes the operations and components of the processing tray unit.
Explains how paper is stacked on the processing tray and aligned.
Details how paper is aligned and shifted for sorting purposes.
Explains the process of stapling sheets of paper.
Describes the process of binding paper without using staples.
Explains how jams are detected using sensors and switches.
Illustrates the power supply connections and distribution within the finisher.
Outlines any tasks or checks recommended for regular periodic servicing.
Step-by-step procedure for removing the finisher from the host machine.
Provides a comprehensive list of parts that can be replaced or cleaned.
Instructions for removing and replacing the stapler unit.
Procedure for removing and replacing the staple-free staple unit.
Guide for removing and replacing the stapler shift motor.
Procedure for removing and replacing the assist motor.
Detailed steps for replacing the finisher controller PCB.
Instructions for removing and replacing the delivery sensor.
Procedure for removing and replacing the return belt unit.
Provides an overview of the adjustment and functional setting options in service mode.
Lists fundamental items requiring adjustment for optimal performance.
Procedure to adjust the right-angle of the alignment plate for proper paper alignment.
Steps to adjust paper alignment to correct front/rear direction misalignment.
Procedure to adjust the staple position for front/rear direction issues.
Guide for adjusting the stapler unit's installation position.
Procedure to adjust the binding position for staple-free stapling.
Guides on performing initial checks to diagnose issues before deeper troubleshooting.
Addresses troubleshooting and adjustment for alignment and staple positions.
Pre-installation checks for installation space and power.
Steps for safely unpacking the finisher equipment.
Detailed steps for installing the finisher onto the host machine.
Procedures to verify correct installation and functionality.
Steps for safely detaching the finisher from the host machine.
Lists recommended service tools, solvents, and oils for maintenance.
Provides a schematic diagram of the finisher's electrical circuits.
General| Type | Inner Finisher |
|---|---|
| Compatibility | Canon imageRUNNER ADVANCE series |
| Staple Positions | Corner, Double |
| Maximum Paper Size | A3 |
| Minimum Paper Size | A5 |
| Functions | Stapling |
| Acceptable Paper Size | A3, A4 |
| Staple Capacity | 50 sheets |
| Output Tray Capacity | 500 sheets |
| Power Source | From the Main Unit |
| Punching Patterns | 2-hole, 4-hole |
To Next Page