EasyManua.ls Logo

Canon IP 1500 - User Manual

Canon IP 1500
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTALLATION MANUAL ON CISS FOR PRINTER CANON IP 1500
1
Installation Manual on
Continuous ink supply system (CISS)
For printer Canon IP 1500
Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the
best device for an inkjet printer, and it will definitely decrease your printing costs.
Before using this system, please read this manual carefully. The pictures in this manual
may be different with the real ones. Here just for your reference.
I. Inspection & Unpacking
1. Accessories
1) Continuous ink supply system …………………………………………..1
2) Air Filter …………………………………………………………………1
3) Sponge …………………………………………………………………...1
4) Injector …………………………………………………………………..1
5) Long needle ……………………………………………………………...1
6) Short needle ……………………………………………………………...1
7) Protection clamp …………………………………………………………1
8) Installation Manual ………………………………………………………1
9) Product Warranty ………………………………………………………...1
Pic. 1-1 Pic. 1-2
2. Inspection before installation
Check whether CISS is pulling out, if tube is disconnected.
Please contact local distributor if have found problems.
II. Test printer
1. Check whether printer conditions are normal.
2. Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is
normal (2-2
,
2-3).
Question and Answer IconNeed help?

Do you have a question about the Canon IP 1500 and is the answer not in the manual?

Summary

I. Inspection & Unpacking

1. Accessories

Lists all components included in the CISS package for initial verification.

2. Inspection before installation

Checks the CISS system for any damage or disconnection before proceeding with installation.

II. Test printer

1. Check printer conditions

Verifies the printer is in normal working condition before CISS installation.

2. Perform nozzle test

Prints a nozzle test sheet to confirm print head functionality.

III. Installation Procedures

1. Make the system ready

Prepares the CISS system for installation, including tidying tubes and attaching air filters.

2. Install the CISS cartridges

Guides on removing old cartridges and installing new CISS cartridges in the correct color order.

3. Fix iron rack

Secures the CISS ink tubes to the printer body using a provided rack and adhesive.

4. Check tube length

Evaluates the length of the ink tubes to ensure they do not interfere with printer operation.

5. Adjust the ink tube length

Adjusts ink tube length for optimal positioning, preventing falling or stretching.

6. Insert cartridge fixation rack

Installs a fixation rack to secure the cartridge holder and prevent dislodgement.

7. Test printer operation

Tests the printer's functionality after CISS installation, including nozzle checks and printing.

IV. Take the used CISS off

V. Refill ink

VI. Check air balance tube

VII. Warnings

VIII. Product Warranty

Install Nozzle Seal for BCI - 24 BK

1. Clean the seal

Cleans the seal and sticker to ensure proper adhesion to the cartridge nozzle.

2. Take the printer head out

Safely removes the printer head for seal installation, placing it on clean paper.

3. Install the silicon seal

Installs the silicon seal onto the printer head, checking for correct placement and condition.

Summary

I. Inspection & Unpacking

1. Accessories

Lists all components included in the CISS package for initial verification.

2. Inspection before installation

Checks the CISS system for any damage or disconnection before proceeding with installation.

II. Test printer

1. Check printer conditions

Verifies the printer is in normal working condition before CISS installation.

2. Perform nozzle test

Prints a nozzle test sheet to confirm print head functionality.

III. Installation Procedures

1. Make the system ready

Prepares the CISS system for installation, including tidying tubes and attaching air filters.

2. Install the CISS cartridges

Guides on removing old cartridges and installing new CISS cartridges in the correct color order.

3. Fix iron rack

Secures the CISS ink tubes to the printer body using a provided rack and adhesive.

4. Check tube length

Evaluates the length of the ink tubes to ensure they do not interfere with printer operation.

5. Adjust the ink tube length

Adjusts ink tube length for optimal positioning, preventing falling or stretching.

6. Insert cartridge fixation rack

Installs a fixation rack to secure the cartridge holder and prevent dislodgement.

7. Test printer operation

Tests the printer's functionality after CISS installation, including nozzle checks and printing.

IV. Take the used CISS off

V. Refill ink

VI. Check air balance tube

VII. Warnings

VIII. Product Warranty

Install Nozzle Seal for BCI - 24 BK

1. Clean the seal

Cleans the seal and sticker to ensure proper adhesion to the cartridge nozzle.

2. Take the printer head out

Safely removes the printer head for seal installation, placing it on clean paper.

3. Install the silicon seal

Installs the silicon seal onto the printer head, checking for correct placement and condition.

Canon IP 1500 Specifications

General IconGeneral
Print Resolution4800 x 1200 dpi
Print Speed (Black)20 ppm
Print Speed (Color)14 ppm
ConnectivityUSB
Dimensions435 x 249 x 165 mm
Printer TypeInkjet
Paper SizeA4, Letter, Legal, Envelopes
Ink Cartridge ConfigurationBlack and Color
ModelCanon IP1500

Related product manuals