Chapter 1
1-36
T-1-12
First Level Second Level Third Level Fourth Level Fifth Level
[GL2 Settings] [Color Mode] [Monochrome]
[Color(CAD)1]
[Color(CAD)2]
[Color(CAD)3]
[Color(CAD)4]
[Color(CAD)5]
[Color(CAD)6]
[Print Quality] [Draft]
[Standard]*
[High]
[Print (Economy)] [Off]*
[On]
[Input Resolution] [600dpi]*
[300dpi]
[Paper Source] [Automatic]*
[Roll Paper]
[Cut Sheet]
[Conserve Paper] [Off]*
[On]
[Line Cap] [Software]*
[Rounded]
[Smoothing] [Software]*
[Smooth]
[Line Width] [1dot]
[2dot]
[3dot]
[4dot]*
[5dot]
[6dot]
[7dot]
[ThickenFineLines] [Off]*
[On]
[AdjustFaintLines] [Off]
[On]*
[Auto Rotate] [Off]
[On]*
[Nesting] [Use Nesting] [Off]*
[On]
[Nesting WaitTime] 1-11min.
[Cut Lines] [Off]*
[On]
[On-the-Fly] [Off]*
[On]
To Next Page
Loading...
