What to do if my Canon iPF780 Plotter shows a paper size mismatch error?
If your Canon Plotter shows a 'Paper Size Mismatch' error, ensure that the paper size selected in the printer driver matches the paper size specified in the printer panel.
What does media type mismatch mean on a Canon Plotter?
If you encounter a 'MediaType Mismatch' error on your Canon Plotter, ensure that the paper type and size in the printer driver match those specified in the printer panel.
Why is my Canon iPF780 Plotter not cutting paper?
If your Canon Plotter cannot cut paper, it may be due to a cutting failure or a cut failure during a jam. Here are a few things to check: * For a general cutting failure, try to cut the paper manually and check the cutter. * If the cut failure occurred during a jam, check the cutter unit and surrounding parts, and consider replacing the cutter.
What does hardware error 03800500-2F30 mean on a Canon Plotter?
If your Canon Plotter displays a hardware error (03800500-2F30), it indicates a detectable area failure. You can check the following: * Check the ink tube unit and surrounding parts. * Check the purge unit and surrounding parts. * Check the head management sensor and surrounding parts. * Check the flexible cable unit and surrounding parts. * Ensure the printhead is installed correctly. * Replace the main controller PCB. * Replace the printhead. * Replace the carriage unit.
General| Maximum Print Resolution | 2400 x 1200 dpi |
|---|---|
| Number of Ink Colors | 5 |
| Number of Nozzles | 15, 360 |
| Nozzle Pitch | 1200 dpi |
| Memory | 256 MB |
| Interface | USB 2.0 High-Speed, 10/100Base-T/TX |
| Power Supply | AC 100-240V (50-60Hz) |
| Print Technology | Thermal Inkjet |
| Ink Type | Pigment Ink |
| Ink Configuration | MBK, BK, C, M, Y |
| Ink Tank Size | 130ml |
| Ink Droplet Size | 4 picoliter |
| Media Width | 10" to 36" |
| Media Sizes | Roll paper: 10"-36" (254mm-914.4mm) Cut sheet: 8"-36" (203.2mm-914.4mm) |
| Media Thickness | 0.07 - 0.8 mm |
| Maximum Print Length | 18 meters |
| Printer Language | GARO (Graphic Arts language with Raster Operations), HP-GL/2 |
| Print Speed (A0) | Plain Paper: 48 sec (Fast Economy Mode) Coated Paper: 48 sec (Fast Economy Mode) Glossy Photo Paper: 2:12 (Standard Mode) |
To Next Page
