Problems and Solutions Without Messages
5-7
Troubleshooting
5
Computer indicates a device time-out.
Cause 1 Your computer is sending data to the printer but the printer is not responding.
The printer may be turned off, offline, or not connected to the computer.
Remedy 1 Make sure that the printer is not paused.
Remedy 2 Make sure that the printer's interface cable is securely connected to both the
printer and the computer.
Remedy 3 Reset the printer and computer, then try printing again.
Cause 2 Paper may not be loaded in the paper tray correctly.
Remedy Make sure that paper is properly loaded in the paper tray.
Cause 3 There may be a problem with your interface cable.
Remedy Try a different cable.
CAPT Problems
CAPT is not working properly.
Cause 1 The CAPT for LBP-1120 is not selected as the default printer driver.
Remedy Specify the CAPT for the LBP-1120 as the default driver.
Cause 2 The software may not be installed properly.
Remedy 1 Launch the Trouble Shooter to detect a problems. See "Using the Trouble
Shooter," on p. 5-21.
Remedy 2 To make sure that the CAPT is installed correctly, try printing a page from an
application. If the print fails, the CAPT is not installed correctly. Remove the
CAPT and install it again. See "Uninstalling the CAPT," on p. 3-45, and
"Installing the CAPT," on p. 3-3.
Adobe Type Manager (ATM) font cannot be used.
Cause You may be using the wrong version of Adobe Type Manager.
Remedy Use Adobe Type Manager ver. 2.51 or later.
To Next Page
Loading...
Need help?
General
