5-2
Receiving Faxes (MF3240 Only)
Select the Receive Mode Exit the Setting Menu
Select receive mode with [] or
[]
, then press [OK].
<FaxOnly>: Answers all calls as faxes.
<AnsMode>: Receives faxes automatically and records
voice messages.
<FaxTel>: Switches between fax and voice calls
automatically.
<MANUAL>: Does not answer any calls. You have to
manually receive faxes.
NOTE
F
or <AnsMode>, make sure an answ
ering
machine is connected to the machine.
Press [Stop/Reset] to return to
standby display.
What if...
● You press [Stop/Reset] to cancel a
job:
The <CANCEL DURING TX/RX?>
message appears. Press [ ] to select
<Yes>. The job is canceled, and the
display returns to standby mode.
● The <OUT OF TONER/CHANGE
TONER> message appears:
The toner cartridge is almost empty.
Replace the toner cartridge.
For details on this error message, see
“LCD Messages,” on p. 11-7.
3
4
To Next Page
Loading...
