Registering Combinations of Frequently Used Print
Settings
0W20-028
Specifying combinations of settings such as "1-sided landscape orientation on A4 size paper" every time you print may
be time consuming. If you register these frequently used combinations of print settings as "proles," you can specify
printing settings simply by selecting one of these proles from the list. This section describes how to register proles
and how to print using them.
Registering a Prole(P. 118)
Selecting a Prole(P. 119)
Registering a Prole
1
Change the settings that you want to register as a prole, and click [Add].
● Click the [Basic Settings], [Page Setup], [Finishing], [Paper Source], or [Quality] tabs to specify the print
settings on each screen as necessary. Various Print Settings(P. 80)
2
Enter a prole name in [Name], select an icon, and then click [OK].
● Enter comments on the prole in [Comment] as necessary.
● Click [View Settings] to see the settings to register.
Editing a
prole
● By clicking [Edit] on the right side of [Add] on the screen shown in step 1, you can change the name, icon, or
comment of the proles you have previously registered. You cannot edit the pre-registered proles.
Printing
118
To Next Page
Loading...
Need help?
General