7
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Checking whether the settings are correct
● Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of the
machine. Starting Remote UI(P. 270)
Selecting settings from the operation panel
● IPv6 settings can also be accessed by pressing on the operation panel. IPv6 Settings(P. 294)
If you changed the IP address after installing the printer driver
● You need to add a new port.
Conguring Printer Ports(P. 168)
LINKS
Setting IPv4 Address(P. 154)
Viewing Network Settings(P. 161)
Network
160
To Next Page
Loading...
