51
Zooming
Using the Supplied Wireless Controller or an Optional Remote Controller
The zoom speeds when using the supplied wireless controller, the optional RC-V100 Remote Controller or a
commercially available remote control connected to the REMOTE terminal are different.
Zoom speeds for remote operation
Setting the Zoom Speed of the Supplied Wireless Controller
Supplied wireless controller: Approximate zoom speeds (time required to zoom end-to-end)
* When the zoom speed is too fast, the camcorder may have more trouble focusing automatically while zooming.
1 Select the overall zoom speed level (step 1, A 50).
2 Select [Wireless Ctrlr Zoom Speed].
> [v ! Camera Setup] > [Wireless Ctrlr Zoom Speed]
3 Select [Ï] or [Ð], or drag your finger along the adjustment bar, to set the desired constant speed.
4 Select [X].
Using the Touch Screen’s Zoom Controls
1 Open the onscreen zoom controls.
[FUNC] > [R Zoom]
• The zoom controls appear at the bottom the screen.
2 Touch the zoom controls to operate the zoom.
• Touch anywhere within the V area to zoom out or anywhere within the U
area to zoom in. Touch closer to the center for a slow zoom; touch closer
to the V/U icons for faster zooms.
3 Select [X].
Accessory Zoom speed
Wireless controller (supplied) Constant zoom speed. See the following table.
RC-V100 Remote Controller
(optional)
Variable speed: At default settings, turn the RC-V100's ZOOM dial right to zoom in (S) and left to zoom out
(T). The greater the angle at which the dial is rotated from the center, the faster the zoom.
Commercially available remote
controls
Refer to the remote control's instruction manual.
If the remote control does not support variable zoom: Constant zoom speed.
If the remote control supports variable zoom: Variable zoom speed according to the remote control's settings.
[Wireless Ctrlr Zoom Speed] setting
[Zoom Speed Level] setting
[] Slow] [[ Normal] [Z Fast]
1 (slowest) 4 min. 38 sec. 2 min. 1 min.
16 (fastest) 4.2 sec. 2.6 sec. 1.5 sec.*
To Next Page
Loading...
Need help?
General
